Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSELECTRICAL COMPONENT LOCATIONSELECTRICAL COMPONENT LOCATORCIRCUIT PROTECTION DEVICES
2009 Mercury Milan Premier, 3.0 1, AWD
Circuit Protection Devices
2009 Mercury Milan Premier, 3.0 1, AWDSECTION Circuit Protection Devices
CIRCUIT PROTECTION DEVICES LOCATION
| Component | Location |
|---|---|
| A/C Evaporative Thermistor | Right side of dash. See Figure. |
| Battery Junction Box (BJB) (2.3L) | Left side of engine compartment. See Figure. |
| Battery Junction Box (BJB) (3.0L) | Left front of engine compartment. See Figure. |
| Circuit Breaker | Smart Junction Box (SJB). See Figure. |
| Fusible Link A (2.3L) | Right side of engine. See Figure. |
| Fusible Link A (3.0L) | Center front of engine compartment. See Figure. |
| Fusible Link A (3.5L) | Top of engine. See Figure. |
| Fusible Link B (2.3L) | Right side of engine. See Figure. |
| Fusible Link B (3.0L) | Center front of engine compartment. See Figure. |
| Fusible Link B (3.5L) | Top of engine. See Figure. |
| One Touch Integrated Start (OTIS) Diode | Battery Junction Box (BJB). See Figure. |
| PCM Diode | Battery Junction Box (BJB). See Figure. |
| Smart Junction Box (SJB) | Base of left "A" pillar. See Figure. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.