SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2009MILAN PREMIER, 3.0 1, AWDREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESMODULE CONFIGURATION SYSTEMDIAGNOSTIC TESTSMODULE CONFIGURATIONPRINCIPLES OF OPERATIONDEFINITION OF TERMSAS-BUILT DATA
2009 Mercury Milan Premier, 3.0 1, AWD

As-Built Data

2009 Mercury Milan Premier, 3.0 1, AWDSECTION As-Built Data

As-Built data is a VIN-specific module configuration record. During vehicle build, the configuration from all modules is downloaded and stored in the As-Built database. As-Built data will not reflect customer preference items that have been changed from the default state. These items will need to be changed using programmable parameters after the module is configured.

NOTE: It is not necessary to obtain As-Built data unless directed to do so by the scan tool. This data may be accessed from the technician service publication website.
BODY/CHASSIS MODULE ADDRESSES FOR AS-BUILT ENTRY

Module Name Module Address
Accessory protocol interface module (APIM) 7D0
Audio control module (ACM) 727
Audio digital signal processing (DSP) module 783
Driver door module (DDM) 740
Driver seat module (DSM) 744
Dual climate control seat module (DCSM) 776
Instrument cluster (IC) 720
Occupant classification system module (OCSM) 765
Parking aid module (PAM) 736
Restraints control module (RCM) 737
Satellite digital audio receiver system (SDARS) module 782
Smart junction box (SJB) 726
MODULE CONFIGURATION AND PARAMETER CHART

Module Name Reprogram/ Flash Capable Requires PMI Requires Adaptive Learning Requires Calibration Available Programmable Parameters
Accessory protocol interface module (APIM) Yes Yesa No No
  • None
ABS module No No No No
  • None
Audio control module (ACM) Yes Yes No No
  • Aux jack
  • Display units (NAV only)
  • Language (NAV only)
  • Phone module
  • SDARS module
Audio digital signal processing (DSP) module Yes Yes No No
  • None
Driver door module (DDM) Yes No No No
  • None
Driver seat module (DSM) Yes Yes No No
  • Easy entry/exit
Dual climate control seat module (DCSM) Yes Yes No No
  • None
Heating ventilation air conditioning (HVAC) module Yes No No No
  • None
Instrument cluster (IC) Yes Yes No No
  • Belt-Minder®
Occupant classification system module (OCSM) Yes No No
  • Seat weight sensor re-zero
  • None
Parking aid module (PAM) Yes Yes No No
  • None
PCM Yes Yes Yes No
  • Speed control enable/disable
Restraints control module (RCM) Yes Yes No
  • Seat weight sensor re-zero
  • Driver seat Belt-Minder® activation
  • Passenger seat Belt-Minder® activation
Satellite digital audio receiver system (SDARS) module Yes Yes No No
  • Canadian broadcast
Smart junction box (SJB) Yes Yes No No
  • Customer auto locking
  • Customer auto-unlocking
  • Customer perimeter lighting
  • Customer central/2-stage toggle
  • Customer trim switch inhibit
  • RKE transmitter panic activation button press mode
  • Global open
Transmission control module (TCM) Yes No Yes No
  • None
4X4 control module Yes No No No
  • None

a

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.