Front Controls Interface Module (FCIM) DTC Chart

2009 Mercury Mariner Hybrid, AWDSECTION Front Controls Interface Module (FCIM) DTC Chart
DIAGNOSTIC TROUBLE CODE (DTC) LIST

DTC Description Action
B1318 Battery Voltage Low GO to PINPOINT TEST AD .
B1342 ECU is Faulted CLEAR the DTCs. CARRY OUT the self-test. If DTC B1342 is retrieved again, INSTALL a new Front Controls Interface Module (FCIM). REFER to FRONT CONTROLS INTERFACE MODULE (FCIM) . TEST the system for normal operation.
B2924 Audio Button Stuck GO to PINPOINT TEST R .
U0140 Lost Communication With Body Control Module (GEM) GO to PINPOINT TEST AA .
U0184 Lost Communication With Radio (ACM) GO to PINPOINT TEST R .
U2050 No Application Present REFER to MODULE CONFIGURATION .
U2051 One or More Calibration Files Missing/Corrupt REFER to MODULE CONFIGURATION .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.