General Specifications

2006 Mercury Montego Premier, AWDSECTION General Specifications
GENERAL SPECIFICATIONS

Item Specification
Lubricants 
MERCON® Multi-Purpose Automatic Transmission Fluid XT-2-QDX (US ); XT-2-LM12 (Canada) MERCON®
Power Steering Gear 
Fluid capacity 1.13 L (2.4 pt)
Turning effort 2.27 kg (5 lb)
Turns lock-to-lock 2.86
Power Steering Purge Vacuum 
Vacuum 68-85 kPa (20-25 in/Hg)
Power Steering Pump 
Flow 9.42 liters/minute (2.48 gpm) Fluid @ 74-80°C (165-176°F) Engine at idle
Pressure 414 kPa (60 psi) Fluid @ 74-80°C (165-176°F) Engine at idle
Minimum capacity 4.33 liters/minute (1.14 gpm) Fluid @ 74-80°C (165-176°F) Engine at idle Pressure at 5,102 kPa (740 psi)
Relief pressure 9,997-10,894 kPa (1,450-1,580 psi)
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.