Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
All Other Models
2001 Mercury Villager BaseSECTION All Other Models
- Measure toe-in with front wheels straight-ahead, and steering wheel locked in centered position. Adjust toe-in by loosening clamps and adjusting sleeve to obtain correct specification. Maintain steering wheel in centered position.
- If steering wheel is not centered prior to wheel alignment, determine which wheel assembly is out of adjustment, and compensate that side to center steering wheel. Multiple attempts may be necessary to properly center steering wheel.
- When tightening clamps, ensure clamp bolts are positioned so there will be no interference with other parts throughout entire travel of steering linkage.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.