Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2001SABLE LS, 4D SEDAN, 3.0 U, AX4SREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM CONTROLREMOVAL & INSTALLATIONMASTER CYLINDER/BOOSTER ASSEMBLYREMOVAL
2001 Mercury Sable LS, 4D Sedan, 3.0 U, AX4S
Master Cylinder/Booster Assembly: Removal
2001 Mercury Sable LS, 4D Sedan, 3.0 U, AX4SSECTION Removal
- With engine off, pump brake pedal until all vacuum is removed from booster. Disconnect negative battery cable. Unplug electrical connectors from master cylinder/booster assembly. Disconnect vacuum hose at check valve. Disconnect hydraulic lines. Plug all line openings.
- Remove trim panel from under steering column. Remove stoplight switch. Remove booster retaining nuts. Disengage push rod from brake pedal linkage. From engine compartment, remove master cylinder/booster assembly. Separate booster and master cylinder by removing master cylinder retaining nuts.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.