Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2001SABLE LS, 4D SEDAN, 3.0 U, AX4SREPAIR AND DIAGNOSISBRAKESTRACTION CONTROLANTI-LOCK BRAKE SYSTEM CONTROLDIAGNOSIS & TESTINGON-DEMAND SELF-TESTUSING NEW GENERATION STAR (NGS) SCAN TESTER
2001 Mercury Sable LS, 4D Sedan, 3.0 U, AX4S
Using New Generation Star (NGS) Scan Tester
2001 Mercury Sable LS, 4D Sedan, 3.0 U, AX4SSECTION Using New Generation Star (NGS) Scan Tester
- Turn ignition off. Locate Data Link Connector (DLC) under dash, on left side of steering column. Following manufacturer's instructions, connect NGS tester to DLC.
- Turn ignition on. Follow instructions on scan tester menu. Record codes in order received. These codes indicate current faults in system and should be serviced in order of appearance. Erase continuous DTCs and perform self-test diagnostics for anti-lock brake control module. If DTCs retrieved are related to concern, see ON-DEMAND SELF-TEST DIAGNOSTIC TROUBLE CODE DEFINITIONS table. If no DTCs retrieved are related to concern, see TROUBLE SHOOTING .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.