Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2001SABLE LS, 4D SEDAN, 3.0 U, AX4SREPAIR AND DIAGNOSIS (SINGLE PAGE)ENGINE PERFORMANCESYSTEMENGINE CONTROLS SELF-DIAGNOSTICS - EEC-V - CNG & GASOLINE - INTRODUCTION, SELF-DIAGNOSTIC SYSTEM, ADDITIONAL SYSTEM FUNCTIONS, PROGRAMMING PCM, DIAGNOSTIC TROUBLE CODE DEFINITIONS, HOW TO USE SYSTEM TESTSADDITIONAL SYSTEM FUNCTIONSON-BOARD SYSTEM READINESS TEST MODEACCESSING OSR TEST MODE
2001 Mercury Sable LS, 4D Sedan, 3.0 U, AX4S
Accessing OSR Test Mode
2001 Mercury Sable LS, 4D Sedan, 3.0 U, AX4SSECTION Accessing OSR Test Mode
To enter OSR test mode, turn ignition switch to OFF position. Ensure test equipment is properly attached. Program scan tool using the following steps:
- Select VEHICLE & ENGINE SELECTION menu.
- Select NEW VEHICLE, YEAR & MODEL.
- Follow operating instructions from scan tool menu.
- Select GENERIC OBD-II FUNCTIONS. Press TEST button if monitors are not complete.
- Start engine and allow to idle.
- Select ON-BOARD SYSTEM READINESS.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.