Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2000SABLE V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSENGINECYLINDER BLOCK ASSEMBLYSYSTEM SPECIFICATIONS
2000 Mercury Sable V6-3.0L DOHC VIN S
System Specifications
2000 Mercury Sable V6-3.0L DOHC VIN SSECTION System Specifications
| Head Gasket Thickness | 0.40 in | |
| Head Gasket Surface Finish | 1.5 mm | |
| Main Bearing Bore Diameter | 2.677 - 2.6780 Inch (in) | |
| Cylinder Bore | Diameter | Refer to Note Grade 1: 89.000 - 89.010 mm (3.50393 - 3.504323 inch) Grade 2: 89.010 - 89.020 mm (3.504323 - 3.504717 inch) Grade 3: 89.020 - 82.030 mm (3.504717 - 3.50511 inch) |
| Surface Finish (RMS) | 0.2 - 0.6 Micron (micron) | |
| Out-Of-Round Limit | 0.0005 Inch (in) | |
| Out-Of-Round Service Limit | 0.0007 Inch (in) | |
| Taper Service Limit | 0.008 Inch (in) | |
| Lower Cylinder Block Bolts And Studs | Refer to Procedure |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.