SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY2000MYSTIQUE GS, 2.0 3, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONCOMPUTER RELEARN PROCEDURESRELEARN PROCEDURESREMOTE KEYLESS ENTRY (RKE) TRANSMITTER PROGRAMMINGESCORT
2000 Mercury Mystique GS, 2.0 3, Automatic

Remote Keyless Entry (RKE) Transmitter Programming: Escort

2000 Mercury Mystique GS, 2.0 3, AutomaticSECTION Escort
  1. Verify battery is fully charged and anti-theft system is not armed or triggered (if equipped). Turn ignition switch from OFF to ON position 8 times within 10 seconds, ending in ON position, or turn ignition switch from OFF to START position 4 times within 10 seconds, ending in ON position. If programming mode is successfully entered, the RAP module will lock and unlock all doors (Mexico anti-theft systems will chirp horn).
  2. Press any button on transmitter. Door locks will lock and unlock to acknowledge successful programming (Mexico anti-theft systems will chirp horn). Repeat this step to program additional transmitters. When finished programming all transmitters, turn ignition off.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.