Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Programming Using 2 Programmed Keys
Insert a programmed key into ignition switch. Turn ignition switch to START position for one second. Turn ignition switch to OFF position and remove key. Within 5 seconds insert another programmed ignition key into ignition switch and turn ignition switch to START position for one second. Turn ignition switch to OFF position and remove key. Within 5 seconds insert ignition key to be programmed into ignition switch and turn ignition switch to START position for one second. Turn ignition switch to OFF position and remove key. Vehicle should now start with new ignition key.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.