Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1999SABLE V6-3.0L DOHC VIN SREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCOMPRESSOR HVACSERVICE AND REPAIRCOMPRESSOR BRACKET
1999 Mercury Sable V6-3.0L DOHC VIN S
Compressor Bracket
1999 Mercury Sable V6-3.0L DOHC VIN SSECTION Compressor Bracket
REMOVAL
1. Remove A/C compressor.
2. Remove three bolts and A/C compressor brace.
3. Remove four bolts and A/C compressor mounting bracket from engine.
INSTALLATION
1. Follow removal procedure in reverse order.
1. Remove A/C compressor.
2. Remove three bolts and A/C compressor brace.
3. Remove four bolts and A/C compressor mounting bracket from engine.
INSTALLATION
1. Follow removal procedure in reverse order.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.