Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1999SABLE LS, 4D WAGON, 3.0 SREPAIR AND DIAGNOSISQUICK LOOKUPSDTC INDEXREMOTE KEYLESS ENTRY SYSTEMS DTCS
1999 Mercury Sable LS, 4D Wagon, 3.0 S
Remote Keyless Entry Systems DTCS
1999 Mercury Sable LS, 4D Wagon, 3.0 SSECTION Remote Keyless Entry Systems DTCS
GENERIC ELECTRONIC MODULE (GEM) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description |
|---|---|
| B1300 | Power Door Lock Circuit Failure |
| B1309 | Power Door Lock Sense Circuit Short To Ground |
| B1310 | Power Door Unlock Circuit Failure |
| B1342 | ECU Failure |
| B1371 | Illuminated Entry Relay Coil Circuit Failure |
| B1373 | Illuminated Entry Relay Circuit Short To Battery |
| B1397 | Power Door Unlock Circuit Short To Battery |
| B1607 | Illuminated Entry Input Circuit Failure |
| B1610 | Illuminated Entry Input Circuit Short To Ground |
| B1830 | Door Unlock/Disarm Switch Circuit Failure |
| B1833 | Door Unlock/Disarm Switch Circuit Short To Ground |
| B1834 | Door Unlock/Disarm Switch Output Circuit Failure |
| B1836 | Door Unlock/Disarm Switch Output Circuit Short To Battery |
REMOTE ANTI-THEFT PERSONALITY (RAP) DIAGNOSTIC TROUBLE CODE (DTC) LIST
| DTC | Description | Perform Test |
|---|---|---|
| B1485 | Brake Pedal Input Short To Battery | TEST H |
| B1526 | Keypad Short To Ground (Any Circuit) | TEST C |
| B1629 | Transmission Reverse Input Short To Battery | TEST H |
| B2425 | Remote Keyless Entry Out Of Synchronization | TEST D |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.