Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1996SABLE LS, 4D SEDAN, 3.0 SREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
1996 Mercury Sable LS, 4D Sedan, 3.0 S
Quick Lookups: Fluids
1996 Mercury Sable LS, 4D Sedan, 3.0 SSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 6.50 OZS. | 0.19 L | PAG 46 | S | |||
| Air Cond Refrigerant | 2.15 LBS. | 0.97 KG | R-134a | S | |||
| Automatic Transmission Fluid | Trans Mfr CD AX4N,4 VPC | 13.10 QTS. | 12.39 L | Automatic Transmission Fluid MERCON | S | ||
| Brake Fluid | N/A | N/A | MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid | Fill to line on reservoir. | S | ||
| Engine Coolant | 4 VPC | 10.60 QTS. | 10.03 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | S | ||
| Engine Oil | 4 VPC | w/Filter | 5.50 QTS. | 5.2 L | SAE 5W-20 Premium Synthetic Blend Motor Oil | Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. | S |
| Fuel Tank | 16.00 GALS. | 60.56 L | S | ||||
| Power Steering Fluid | 0.85 QTS. | 0.8 L | Automatic Transmission Fluid MERCON V | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.