Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1996SABLE GS, 4D WAGON, AX4NREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 9 (ENGINE CONTROLS - TESTS W/CODES 4.6L)CIRCUIT TESTSCIRCUIT TEST DF - VEHICLE SPEED CIRCUIT (VSC) CHECKM/T EQUIPPED VEHICLES
1996 Mercury Sable GS, 4D Wagon, AX4N
M/T Equipped Vehicles
1996 Mercury Sable GS, 4D Wagon, AX4NSECTION M/T Equipped Vehicles
WARNING: This page is about a different car, the 1996 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
- Place gear selector in first gear.
- Accelerate heavily to 35 MPH, not shifting higher than second gear.
- Coast down to idle speed and stop vehicle.
After third drive cycle, perform QUICK TEST . If any DTCs are present, go to appropriate CIRCUIT TEST. If DTCs are not present, testing is complete.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.