Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1996SABLE GS, 4D WAGON, AX4NREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 42 (AUTOMATIC TRANSMISSION SERVICING)TORQUE SPECIFICATIONS
1996 Mercury Sable GS, 4D Wagon, AX4N
Torque Specifications
1996 Mercury Sable GS, 4D Wagon, AX4NSECTION Torque Specifications
WARNING: This page does not describe the selected car, but rather 51 other vehicles, including the 1999 Mercury Villager, 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, and 1999 Mercury Mountaineer. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |||
|---|---|---|---|---|
| Manual Lever-To-TR Sensor Nut | ||||
| E4OD, 4F20E & 4R70W | 20-29 (27-39) | |||
| F4E III, 4R44E & 5R55E | 31-40 (42-54) | |||
| Oil Drain Plug | ||||
| F4E III | 29-34 (39-46) | |||
| CD4E | 19-21 (26-28) | |||
| Torque Converter Drain Plug | ||||
| E4OD & 4R100 | 18-20 (24-27) | |||
| 4R70W | 21-23 (28-31) | |||
| INCH Lbs. (N.m) | ||||
| Filter Screen | ||||
| 4R70W | 80-124 (9-14) | |||
| 4R44E & 5R55E | 71-97 (8-11) | |||
| Manual Lever-To-TR Sensor Nut | ||||
| AX4N & AX4S | 97-141 (11-16) | |||
| Transmission Range (TR) Sensor/Switch Bolts | ||||
| AX4N, AX4S & 4R70W | 80-106 (9-12) | |||
| CD4E | 97-115 (11-13) | |||
| E4OD | 53-71 (6-8) | |||
| F4E III | 71-97 (8-11) | |||
| 4F20E | 27 (3) | |||
| 4R44E & 5R55E | 71-97 (8-11) | |||
| 4R100 | 71-89 (8-10) | |||
| Oil Pan Bolt | ||||
| AX4N & AX4S | 89-106 (10-12) | |||
| CD4E | 124-159 (14-18) | |||
| E4OD, 4R70W & 4R100 | (1) | |||
| F4E III | 71-97 (8-11) | |||
| 4F20E | 62-80 (7-9) | |||
| 4R44E & 5R55E | 115-133 (13-15) | |||
| 4R70W | 71-124 (8-14) | |||
|
||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.