SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1996SABLE GS, 4D WAGON, AX4NREPAIR AND DIAGNOSIS (SINGLE PAGE)MAINTENANCEPROCEDURESMAINTENANCE REMINDER LIGHT (RESET PROCEDURES)ENGINE OIL REPLACEMENT REMINDERENGINE OIL REPLACEMENT REMINDER RESET - PROCEDURE 25HIGH SERIES CLUSTER
1996 Mercury Sable GS, 4D Wagon, AX4N

High Series Cluster

1996 Mercury Sable GS, 4D Wagon, AX4NSECTION High Series Cluster

Use the information display controls on the steering wheel to reset the oil change indicator.

From the main menu scroll to:

  • Truck Info
    1. Press the down arrow button, then from this menu scroll to the following message.
  • Maintenance Monitor
    1. Press the OK button.
  • Oil Life: xxx%
    1. Press the down arrow button, then from this menu scroll to the following message.
  • Oil Life
    1. Press the OK button.
  • Oil Life Hold OK to Reset
    1. Press and hold the OK button until the instrument cluster displays the following message.
    2. Oil Life: 100%
    3. When the oil change indicator resets, the instrument cluster displays 100%.
    4. Repeat the process if the oil change indicator does not reset.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.