Service Precautions

1995 Mercury Villager GS, Van PassengerSECTION Service Precautions

Observe following precautions when working with air bag systems:

  • When working around steering column components and before any repairs are performed, disable air bag system.
  • Before straightening any damage to body, or before performing electrical arc-welding, disable air bag system.
  • Always wear safety glasses and gloves when handling a deployed air bag module. Air bag module may contain sodium hydroxide deposits which are irritating to the skin.
  • DO NOT repair any portion of SRS wiring harness.
  • Always handle air bag module with trim cover away from your body. Always place air bag module on workbench with trim cover up, away from loose objects.
  • DO NOT expose any SRS component to temperatures in excess of 212Β°F (100Β°C).
  • DO NOT expose any SRS component to cleaning agents such as solvents, gasoline, lye, etc.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.