Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1993SABLE GS, 4D SEDAN, 3.0 U, AXODEREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
1993 Mercury Sable GS, 4D Sedan, 3.0 U, AXODE
Quick Lookups: Fluids
1993 Mercury Sable GS, 4D Sedan, 3.0 U, AXODESECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 5.00 OZS. | 0.14 L | PAG 100 | Refer To Compressor Label. | S | ||
| Air Cond Refrigerant | 2.00 LBS. | 0.9 KG | R-12 | S | |||
| Automatic Transmission Fluid | 12.80 QTS. | 12.11 L | Automatic Transmission Fluid MERCON | S | |||
| Brake Fluid | N/A | N/A | MOTORCRAFT High Performance DOT 3 Motor Vehicle Brake Fluid | Fill to line on reservoir. | S | ||
| Engine Coolant | 3.0L Eng | 11.60 QTS. | 10.97 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | S | ||
| Engine Oil | 3.0L Eng | 5.00 QTS. | 4.73 L | SAE 5W-20 Premium Synthetic Blend Motor Oil | Refer to Engine Oil recommended applications for SAE 5W-20 and 5W-30 motor oils TSB No. 02-1-9. | S | |
| Fuel Tank | Option extended range | 18.40 GALS. | 69.65 L | S | |||
| Fuel Tank | Standard | 16.00 GALS. | 60.56 L | S | |||
| Power Steering Fluid | 3.0L Eng | 1.00 QTS. | 0.94 L | Automatic Transmission Fluid Type F | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.