SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1993SABLE GS, 4D SEDAN, 3.0 U, AXODEREPAIR AND DIAGNOSIS (SINGLE PAGE)BODY & FRAMEPOWER WINDOWSTESTINGWINDOW SWITCHESMASTER SWITCH (MUSTANG, TEMPO & TOPAZ)
1993 Mercury Sable GS, 4D Sedan, 3.0 U, AXODE

Master Switch (Mustang, Tempo & Topaz)

1993 Mercury Sable GS, 4D Sedan, 3.0 U, AXODESECTION Master Switch (Mustang, Tempo & Topaz)
  1. Remove switch from vehicle and test with a self-powered test light or ohmmeter. With switch in NEUTRAL position, continuity should be present between terminals No. 1 through 9, and terminals No. 10 and 11. See Fig 1 .
  2. With all switches pushed upward (closed position), continuity should be present between terminals No. 1, 3, 5, 7, 10 and 11, and terminals No. 2, 4, 6, 8 and 9. With all switches pushed downward (open position), there should be continuity between terminals No. 1, 3, 5, 7 and 9 and terminals No. 2, 4, 6, 8, 10 and 11.
  3. With lock-out depressed, there should be no continuity between terminal No. 11 and any other terminal. If switch fails any of these tests, replace master switch.
Fig 1: Master Switch Test Terminals (Mustang, Tempo & Topaz)
G9130Courtesy of FORD MOTOR CO.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.