Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1993SABLE GS, 4D SEDAN, 3.0 U, AXODEREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTWINDOW MOTORS & REGULATORSPOWER WINDOWSTESTINGWINDOW SWITCHESSINGLE SWITCH (SABLE & TAURUS)
1993 Mercury Sable GS, 4D Sedan, 3.0 U, AXODE
Single Switch (Sable & Taurus)
1993 Mercury Sable GS, 4D Sedan, 3.0 U, AXODESECTION Single Switch (Sable & Taurus)
- Remove switch from vehicle and test with a self-powered test light or ohmmeter. With switch in NEUTRAL position, there should be continuity between terminals No. 3 and 6, and No. 4 and 7. See Fig 1 .
- Press raised portion of switch (closed position). There should be continuity between terminals No. 4 and 5, and No. 3 and 6.
- Press depressed portion of switch (open position). There should be continuity between terminals No. 5 and 6, and No. 4 and 7. If switch fails any of these tests, replace switch.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.