Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1992TRACER BASE, 4D WAGON, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)TRANSMISSIONAUTOMATIC TRANSOVERHAUL - 4EATCOMPONENT DISASSEMBLY & REASSEMBLYCOASTING CLUTCHDISASSEMBLY
1992 Mercury Tracer Base, 4D Wagon, Automatic
Coasting Clutch: Disassembly
1992 Mercury Tracer Base, 4D Wagon, AutomaticSECTION Disassembly
- Remove retaining ring, pressure plate, coasting clutch pack and dished plate. See Figure and Fig 1 .
- Install Spring Compressor (T65L-77515-A), and compress return spring and retainer. Remove retaining ring. Remove spring compressor. Remove return spring and retainer.
- Remove coasting clutch drum from clutch assembly using compressed air. Remove coasting piston from drum.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.