SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1991TRACER BASE, 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 83 (A/C-HEATER SYSTEM - MANUAL)A/C SYSTEM SPECIFICATIONS
1991 Mercury Tracer Base, 4D Sedan, Automatic

A/C System Specifications

1991 Mercury Tracer Base, 4D Sedan, AutomaticSECTION A/C System Specifications
WARNING: This page is about a different car, the 1994 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
A/C SYSTEM SPECIFICATIONS

Application Specification
Compressor Type Ford FS-10 10-Cyl.
Compressor Belt Tension (1)
System Oil Capacity (2) 7 ozs.
Refrigerant (R-134a) Capacity 40-41 ozs.
System Operating Pressures (3)
High Side 160-245 (11.2-17.2 kg/cm2 )
Low Side 22-47 psi (1.5-3.3 kg/cm2 )
(1) Serpentine belt tension is automatically adjusted by tensioner pulley.
(2) Use R-134a refrigerant and PAG (YN-12) Refrigerant Oil Ford Specification WSH-M1C231-B).
(3) Specification is with ambient temperature at 80°F (27°C), relative humidity at 50-70 percent and engine speed at 1500 RPM.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.