Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1991TRACER BASE, 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 18 (ENGINE CONTROLS - REMOVE/INSTALL/OVERHAUL)TORQUE SPECIFICATIONSTORQUE SPECIFICATIONS (4 CYL.)
1991 Mercury Tracer Base, 4D Sedan, Automatic
Torque Specifications (4 CYL.)
1991 Mercury Tracer Base, 4D Sedan, AutomaticSECTION Torque Specifications (4 CYL.)
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 1994 Mercury Tracer, 1994 Mercury Topaz, 1994 Mercury Sable, 1994 Mercury Grand Marquis, and 1994 Mercury Cougar. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | |
|---|---|---|
| 1.8L | ||
| Distributor Hold-Down Bolts | 14-19 (19-26) | |
| Fuel Rail Bolts | 14-19 (19-26) | |
| Oxygen Sensor | 22-36 (30-49) | |
| Throttle Body Bolts | 14-19 (19-26) | |
| Upper Intake Manifold Bolts | 14-19 (19-26) | |
| 1.9L | ||
| Camshaft Position Sensor | 15-22 (20-30) | |
| Fuel Rail Bolts | 15-22 (20-30) | |
| Throttle Body Bolts | 15-22 (20-30) | |
| 2.0L | ||
| Distributor Hold-Down Bolts | 14-18 (19-24) | |
| Fuel Rail Bolts | 14-18 (19-24) | |
| Heated Oxygen Sensor | 22-36 (30-49) | |
| Throttle Body Bolts | 14-19 (19-26) | |
| 2.3L | ||
| EGR Tube | 30-41 (41-56) | |
| Distributor Hold-Down Bolt | 17-25 (23-34) | |
| Fuel Rail Bolts | 15-22 (20-30) | |
| Upper Intake Manifold Bolts | 15-22 (20-30) | |
| Throttle Body Bolts | 12-14 (16-19) | |
| INCH Lbs. (N.m) | ||
| 1.8L | ||
| Fuel Pressure Regulator Screws | 71-97 (8-11) | |
| 1.9L | ||
| Crankshaft Position Sensor Bolts | 44-62 (5-7) | |
| Fuel Pressure Regulator Screws | 27-35 (3-4) | |
| Ignition Coil Bolt | 40-61 (4.5-7) | |
| 2.0L | ||
| Crankshaft Position Sensor Screws | 71-97 (8-11) | |
| 2.3L | ||
| Fuel Pressure Regulator Screws | 27-44 (3-5) | |
| Throttle Position Sensor Screws | 27-35 (3-4) | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.