SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1991TRACER BASE, 4D SEDAN, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 143 (HVAC SYSTEM - A/C-HEATER SYSTEM - AUTOMATIC)A/C SYSTEM SPECIFICATIONS
1991 Mercury Tracer Base, 4D Sedan, Automatic

A/C System Specifications

1991 Mercury Tracer Base, 4D Sedan, AutomaticSECTION A/C System Specifications
WARNING: This page is about a different car, the 1996 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: To avoid injury from accidental air bag deployment, read and carefully follow all SERVICE PRECAUTIONS and DISABLING & ACTIVATING AIR BAG SYSTEM procedures in the AIR BAG RESTRAINT SYSTEM article in the ACCESSORIES/SAFETY EQUIPMENT section.
SPECIFICATIONS

Application Specification
Compressor Type Ford FS-10 10-Cyl.
System Oil Capacity (1) 7.0 ozs.
Refrigerant (R-134a) Capacity 39.0-41.0 ozs.
System Operating Pressures (2)
High Side 160-250 psi (11.2-17.6 kg/cm2 )
Low Side 20-50 psi (1.4-3.5 kg/cm2 )
(1) Use PAG YN-12b Refrigerant Oil (Part No. F2AZ-19577-A).
(2) Approximate pressures with ambient temperature of 80°F (27°C).
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.