Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Failure Mode Effects Management (FMEM), Code 98 or 998
The FMEM mode allows system operation when sensor(s) fails or transmits signals which are out of normal operating range. When this happens, ECA substitutes a mid-range signal for the defective sensor(s) while continuing to monitor the sensor(s). If the faulty sensor's signals return to normal operating range, the ECA will use those signals. A Code 98 or 998 will be displayed when the FMEM mode is in effect.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.