Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1983ZEPHYR Z-7, 3.3 XREPAIR AND DIAGNOSIS (SINGLE PAGE)QUICK LOOKUPSFLUIDS
1983 Mercury Zephyr Z-7, 3.3 X
Quick Lookups: Fluids
1983 Mercury Zephyr Z-7, 3.3 XSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Refrigerant | N/A | N/A | R-12 | For further details see "Air conditioner specification label". | S | ||
| Automatic Transmission Fluid | 3.3L Eng | 10 1/4" Converter | 7.50 QTS. | 7.09 L | Automatic Transmission Fluid Type H | S | |
| Automatic Transmission Fluid | 3.3L Eng | 12" Converter,w/o Converter Clutch | 10.30 QTS. | 9.74 L | Automatic Transmission Fluid Type H | S | |
| Brake Fluid | N/A | N/A | DOT 3 Brake Fluid | Fill at master cylinder to 1/4" from top. | S | ||
| Differential Gear Oil | 7.5" Ring Gear Axle | 3.20 PTS. | 1.51 L | FORD Hypoid Gear Oil | S | ||
| Engine Coolant | 3.3L Eng | w/Air Cond | 8.50 QTS. | 8.04 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Specification: ESE M97B44 A. | S |
| Engine Coolant | 3.3L Eng | w/o Air Cond | 8.50 QTS. | 8.04 L | 50/50 mixture of FORD Premium Cooling System Fluid and water | Specification: ESE M97B44 A. | S |
| Engine Oil | 5.00 QTS. | 4.73 L | SAE 5W-30 (Preferred) (Below -20Deg.F to 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) | S | |||
| Fuel Tank | Standard | 16.00 GALS. | 60.56 L | S | |||
| Fuel Tank | w/Extended Fuel Range | 20.00 GALS. | 75.7 L | S | |||
| Manual Transmission Fluid | 2.80 PTS. | 1.32 L | Automatic Transmission Fluid Type F | S | |||
| Power Steering Fluid | 1.60 PTS. | 0.75 L | Automatic Transmission Fluid Type F | Approximate dry capacity, includes cooler line. Fluid level indicator should be used to determine actual fluid requirements and fluid specifications. Check level at normal operating temperature. DO NOT overfill. | S | ||
| Windshield Washer Fluid | N/A | N/A | Windshield Washer Fluid | Follow the Manufacturer's Instructions for the mixture ratio. | S | ||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.