Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCURY1971CYCLONE BASE, 6.6L ENG VIN S, AUTOMATIC TRANS, TRANS MFR CD FMXREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONSTEERINGMAP - STEERING, SUSPENSION, WHEEL ALIGNMENT, WHEELS & TIRESSTEERING AND SUSPENSION, WHEEL ALIGNMENT, WHEELS AND TIRESTORQUE SENSOR
1971 Mercury Cyclone Base, 6.6L Eng VIN S, Automatic Trans, Trans Mfr CD FMX
Torque Sensor
1971 Mercury Cyclone Base, 6.6L Eng VIN S, Automatic Trans, Trans Mfr CD FMXSECTION Torque Sensor
| Condition | Code | Procedure |
|---|---|---|
| Attaching hardware broken | A | Require repair or replacement of hardware |
| Attaching hardware missing | C | Require replacement of hardware |
| Attaching hardware not functioning | A | Require repair or replacement of hardware |
| Attaching hardware threads damaged | A | Require repair or replacement of hardware |
| Attaching hardware threads stripped (threads missing) | A | Require replacement of hardware |
| Connector (Weatherpack type) leaking | A | Require repair or replacement |
| Connector broken | A | Require repair or replacement |
| Connector melted | A | Require repair or replacement |
| Connector missing | C | Require replacement |
| Inoperative | A | Require repair or replacement |
| Leaking (vacuum/fluid/air) | A | Require replacement |
| Out of adjustment | B | Further inspection required |
| Terminal broken | A | Require repair or replacement |
| Terminal burned, affecting performance | A | Require repair or replacement |
| Terminal burned, not affecting performance | 2 | Suggest repair or replacement |
| Terminal corroded, affecting performance | A | Require repair or replacement |
| Terminal corroded, not affecting performance | 2 | Suggest repair or replacement |
| Terminal loose, affecting performance | B | Require repair or replacement |
| Terminal loose, not affecting performance | 1 | Suggest repair or replacement |
| Threads damaged | A | Require repair or replacement |
| Threads stripped (threads missing) | A | Require replacement |
| Wire lead burned | A | Require repair or replacement |
| Wire lead conductors exposed | B | Require repair or replacement |
| Wire lead open | A | Require repair or replacement |
| Wire lead shorted | A | Require repair or replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.