Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCEDES BENZ2025SPRINTER 3500XD 2D CAB CHASSIS EXTENDED, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 667 (FUEL TANK & FUEL LINES)SPECIFICATIONSTORQUE SPECIFICATIONS
2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWD
Torque Specifications
2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWDSECTION Torque Specifications
WARNING: This page is about a different car, the 2005 Ford RV Cutaway, 2005 Ford Econoline, 2005 Ford E450 Super Duty, and 2005 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in | ||
|---|---|---|---|---|---|
| Fuel tank support nuts (aft-of-axle) | 90 | 66 | - | ||
| Fuel tank support bolts (aft-of-axle) | 103 | 76 | - | ||
| Fuel pump and sender bolts | 10 | - | 89 | ||
| Fuel tank support strap nuts (midship) | 25 | 18 | - | ||
| Fuel conditioning module bracket to pump bolts | 17 | 13 | - | ||
| Fuel conditioning module pump cover | 5 | - | 44 | ||
| Fuel conditioning module drain | 1 | - | 9 | ||
| Fuel conditioning module bracket to frame bolts | 17 | 13 | - | ||
| Fuel conditioning module pressure relief cover bolts | 5 | - | 44 | ||
| Fuel conditioning module bowl | (1) | - | - | ||
|
|||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.