Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCEDES BENZ2025SPRINTER 3500XD 2D CAB CHASSIS EXTENDED, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 50 (COMPUTER RELEARN PROCEDURES)RELEARN PROCEDURESREMOTE KEYLESS ENTRY (RKE) TRANSMITTER PROGRAMMINGESCORT
2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWD
Remote Keyless Entry (RKE) Transmitter Programming: Escort
2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWDSECTION Escort
WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Sable, 2000 Mercury Mystique, 2000 Mercury Mountaineer, and 2000 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
- Verify battery is fully charged and anti-theft system is not armed or triggered (if equipped). Turn ignition switch from OFF to ON position 8 times within 10 seconds, ending in ON position, or turn ignition switch from OFF to START position 4 times within 10 seconds, ending in ON position. If programming mode is successfully entered, the RAP module will lock and unlock all doors (Mexico anti-theft systems will chirp horn).
- Press any button on transmitter. Door locks will lock and unlock to acknowledge successful programming (Mexico anti-theft systems will chirp horn). Repeat this step to program additional transmitters. When finished programming all transmitters, turn ignition off.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.