SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCEDES BENZ2025SPRINTER 3500XD 2D CAB CHASSIS EXTENDED, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 50 (COMPUTER RELEARN PROCEDURES)RELEARN PROCEDURESINSTRUMENT CLUSTERINSTRUMENT CLUSTER MODULE (ICM) PROGRAMMING
2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWD

Instrument Cluster Module (ICM) Programming

2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWDSECTION Instrument Cluster Module (ICM) Programming
WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Sable, 2000 Mercury Mystique, 2000 Mercury Mountaineer, and 2000 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.

Prior to removal of ICM, upload module configuration information to the New Generation Star (NGS) tester using manufacturer's instructions. Once ICM has been replaced, download module configuration information from NGS tester into new ICM.

NOTE: Virtual Instrument Cluster (VIC) may also be referred to as instrument cluster. Passive anti-theft system MUST be reconfigured after replacement of the VIC. See PASSIVE ANTI-THEFT SYSTEM (PATS) .
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.