Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCEDES BENZ2025SPRINTER 3500XD 2D CAB CHASSIS EXTENDED, RWDREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 1827 (MANUAL TRANSAXLE/TRANSMISSION AND CLUTCH - GENERAL INFORMATION)SPECIFICATIONSGENERAL SPECIFICATIONS
2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWD
General Specifications
2025 Mercedes Benz Sprinter 3500XD 2D Cab Chassis Extended, RWDSECTION General Specifications
WARNING: This page is about a different car, the 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Clutch Disc | |
| Minimum allowable depth to rivet head | 0.3 mm (0.012 in) |
| Maximum runout | 0.7 mm (0.027 in) |
| Clutch Pressure Plate | |
| Maximum Runout | 0.5 mm (0.02 in) |
| Flywheel Runout | |
| Maximum runout | 0.200 mm (0.008 in) |
| Pressure Plate Diaphragm Spring Fingers | |
| Maximum depth | 0.5 mm (0.020 in) |
| Maximum clearance | 0.5 mm (0.020 in) |
| Clutch pedal free play | 5.0-13.0 mm (0.20-0.51 in) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.