Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCEDES BENZ2021GT C AMG 2D CONVERTIBLEREPAIR AND DIAGNOSISBODY & FRAMEMIRRORSDETACHABLE BODY COMPONENTS -- 190 CHASSISTESTING & REPAIRREMOVE/INSTALL REAR DIFFUSERREMOVE/INSTALL REAR DIFFUSER - AR88.30-P-0530RGB
2021 Mercedes Benz GT C AMG 2D Convertible
Remove/Install Rear Diffuser - AR88.30-P-0530RGB
2021 Mercedes Benz GT C AMG 2D ConvertibleSECTION Remove/Install Rear Diffuser - AR88.30-P-0530RGB
Model 190
with code M032 (Black Series version)
| Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. | AS00.00-Z-0010-01A | |
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Remove/install | |||
| 1 | Lift vehicle with lifting platform. | AR00.60-P-1000RG | |
| 2 | Remove screws (2). | ||
| 3 | Unscrew the bolts (3, 4 and 7) and remove the rear diffuser (1). | ||
| 4 | Install in the reverse order. |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.