Remove/Install Rear Diffuser - AR88.30-P-0530RG

2021 Mercedes Benz GT C AMG 2D ConvertibleSECTION Remove/Install Rear Diffuser - AR88.30-P-0530RG

Model 190 

with code M030 (GT R version) 

except code M032 (Black Series version) 

G16685966Courtesy of MERCEDES-BENZ USA
G16685967Courtesy of MERCEDES-BENZ USA
DANGER Risk of death  caused by vehicle slipping or toppling off of the lifting platform. Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer. AS00.00-Z-0010-01A
REMOVINGINSTALLING Remove/install     
1 Raise vehicle   AR00.60-P-1000RG
2 Remove screws (10) INSTALLATION IMPORTANT : Ensure that diffuser elements (3), air deflector shields (4), underfloor paneling 5 as well as rear diffuser (6) are seated correctly.  
3 Unscrew bolts (2)    
4 Carefully unclip diffuser elements (3) toward rear from bumper INSTALLATION IMPORTANT : Ensure that catch hooks (arrows) are seated correctly.
Check catch hooks (arrows) for damage and, if required,

replace diffuser element (3).
 
5 Unscrew bolts (7) and remove rear diffuser (6)    
6 Install in the reverse order    
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.