Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Increase Speed, Basic Function - GF30.30-P-1000A
Model All (4xWD)
Model All (CAR)
Overview
This document contains information on:
- General
- Function
General
The vehicle's speed is increased by increasing the drive torque.
Function
Increasing the drive torque starts the following activities:
- Increase engine torque.
The engine management system implements the "Increase engine torque" request.
- Gear downshift and upshift if necessary (vehicles with automatic transmission).
The transmission management system implements the "Shift down gear" or "Upshift gear" request.
| Further basic functions | |||
| Torque coordination, basic function | GF07.10-P-1060A | ||
| Gearshift system, basic function | Model all with transmission 700.420/421/422/423, 724.033/044/045/103/114/115/120 |
GF27.60-P-1002A | |
| Model all with transmission 725.0/1 | GF27.60-P-1002B |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.