Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMERCEDES BENZ2021GT 53 AMGREPAIR AND DIAGNOSISENGINE PERFORMANCEENGINE CONTROL SYSTEMSTHROTTLE CONTROL, SPEED CONTROL SYSTEMS -- 290 CHASSIS
2021 Mercedes Benz GT 53 AMG
Throttle Control, Speed Control Systems -- 290 Chassis
2021 Mercedes Benz GT 53 AMGSECTION Throttle Control, Speed Control Systems -- 290 Chassis
- General Information
- Basic Knowledge
- Accelerator Pedal Sensor, Basic Function - GF30.20-P-2000A
- Electronic Accelerator Function
- Cruise Control (CC), Function - GF30.30-P-0001FR
- Rear Pre-Safe (R), Function - GF30.30-P-0015FR
- Steering-Pilot, Function - GF30.30-P-0019FR
- Active Brake Assist, Function - GF30.30-P-0020FR
- Evasive Steering Assist, Function - GF30.30-P-0022FR
- Functional Limitations Of Distance Control, Detailed Information - GF30.30-P-0024-01A
- Increase Speed, Basic Function - GF30.30-P-1000A
- Reduce Speed, Basic Function - GF30.30-P-1001A
- Short And Long-Range Radar Sensor, Component Description - GF30.30-P-3126FR
- DISTRONIC Distance-Pilot Controller Unit, Component Description - GF30.30-P-3218FR
- Active Brake Assist Controller Unit, Component Description - GF30.30-P-3222FR
- Bumper Radar Sensors, Component Description - GF30.30-P-3302FR
- Mercedes-Benz Intelligent Drive Control Unit, Component Description - GF30.30-P-3312FR
- DISTRONIC Distance-Pilot, Function - GF30.30-P-3314FR
- Active Brake Assist With Cross-Traffic Function, Function - GF30.30-P-3341FR
- Intelligent Driving Control Unit, Basic Function - GF30.30-P-9890A
- Distance Control Controller Unit, Basic Function - GF30.30-P-9891A
- Collision Warning System Controller Unit, Basic Function - GF30.30-P-9893A
- Speed Adjustment, Basic Function - GF30.30-P-9900A
- Speed Control, Basic Function - GF30.30-P-9901A
- Speed Limit, Basic Function - GF30.30-P-9902A
- Distance Control, Basic Function - GF30.30-P-9903A
- Safety Precautions
- Testing & Repair
- Test & Adjustment Values
- Torque Specifications
- Forms
- Wiring Diagrams
- Electrical Function Schematic For Electronic Accelerator
- Electrical Function Schematic For Electronic Accelerator - PE30.20-P-2050-97XBA
- Electrical Function Schematic For Electronic Accelerator - PE30.20-P-2050-97XBB
- Electrical Function Schematic For Electronic Accelerator - PE30.20-P-2050XBA
- Electrical Function Schematic For Electronic Accelerator - PE30.20-P-2050XBB
- Electrical Function Schematic For Cruise Control (CC)
- Electrical Function Schematic For PRE-SAFE (R) In Rear
- Electrical Function Schematic For DISTRONIC Distance-Pilot
- Electrical Function Schematic For DISTRONIC Distance-Pilot - PE30.30-P-2068-97XBA
- Electrical Function Schematic For DISTRONIC Distance-Pilot - PE30.30-P-2068-97XBB
- Electrical Function Schematic For DISTRONIC Distance-Pilot - PE30.30-P-2068XBA
- Electrical Function Schematic For DISTRONIC Distance-Pilot - PE30.30-P-2068XBB
- Electrical Function Schematic For Steering-Pilot
- Electrical Function Schematic For Active Brake Assist
- Electrical Function Schematic For Evasive Steering Assist
- Electrical Function Schematic Of Active Brake Assist With Cross-Traffic Function
- Regulate Speed, Function Schematic
- Regulate Distance, Function Schematic
- Limit Speed, Function Schematic
- Electrical Function Schematic For Electronic Accelerator
- Special Tools
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.