2012 Mercedes Benz CL63FACTORY OEM SERVICE PROCEDURE

Spark plugs, location/task/design/function - GF15.10-P-3101M

ENGINE 275.950 in MODEL 215, 220 

ENGINE 275.951 in MODEL 230 up to Model Year 8 

ENGINE 275.953 in MODEL 216, 221 up to Model Year 8 

ENGINE 275.954 in MODEL 230 up to Model Year 8 

ENGINE 275.980 in MODEL 215, 220 

ENGINE 275.981 in MODEL 230 up to Model Year 8 

ENGINE 275.982 in MODEL 216, 221 up to Model Year 8 

ENGINE 285.950 in MODEL 240 

ENGINE 285.980 in MODEL 240 

Fig 1: Identifying Spark Plugs
G10108504Courtesy of MERCEDES-BENZ USA
  Spark plugs, location Two spark plugs per cylinder are fitted in the cylinder head  
  Spark plugs, task Ignite the compressed fuel-air mixture through sparks between the electrodes according to actuation of the ECI ignition system. Detects the ion current.  
  Spark plugs, design In the manufacturer's specific type symbols, all spark plug features are assigned (e. g. heat rating, shape of seating, thread, width across flats, electrode material, spark position).  
  Spark plugs, function The ignition voltage flows from the directly-inserted ignition coils in the ECI ignition modules (N92/1, N92/2) to the spark plugs and causes arcing in the gap between the central electrode and ground electrode.  
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.