Storing steering column position, function - GF46.15-P-2003T

MODEL 211.0 /2 with CODE (275) Memory package (driver seat, steering column, mirrors) 

Function 

The current position is always stored

• with the transition from terminal 15 to terminal 15R,
• upon receipt of a request to store a memory position,
• upon receipt of a request to adjust a memory position, even if the function easy entry/exit is switched off.

Before saving the position, the steering column must be moved to the desired position using the steering column adjustment switch (S59).

Save the steering column position as follows:

• First press the memory switch (S91/2s9) for t≤40ms and release, then press the relevant position key of memory button 1, 2, 3 switch (S91/2s14) within t≥3s of releasing the memory switch (S91/2s9).

The position of the steering column is stored in the driver-side front seat adjustment control unit with memory (N32/1).

On vehicles as of 1.6.07 an acoustic feedback takes place via a warning buzzer integrated in the instrument cluster (A1) when the steering column position is stored.

	Setting driving position, function		GF46.15-P-3005T
	Front seat adjustment switch group, location/design/function		GF91.29-P-2100TA
	Left front seat adjustment control unit with memory location/task		GF91.29-P-2106T
	Driver front door control unit, location/task		GF72.29-P-4115T
	Electronic ignition switch control unit, location/task		GF80.57-P-4120T
	Rear SAM control unit with fuse and relay module, location/task	Model 211.0	GF54.21-P-4130T
		Model 211.2	GF54.21-P-4130TA