Operating, display and control unit, location/task/design/function - GF82.85-P-3114PMU

2006 Mercedes Benz C350 4MaticSECTION Operating, display and control unit, location/task/design/function - GF82.85-P-3114PMU

MODELS 203.0 /2 /7 as of 24.4.04 with CODE (528) HIGH Class USA 

MODELS 203.0 /2 /7 as of 24.4.04 with CODE (530) COMAND APS USA (with navigation system) 

Fig 1: Identifying COMAND Operating Display And Control Unit Location - Models 203.0 /2 /7 As Of 24.4.04 With Code (528) And (530)
G04735699
  Operating, display unit with control unit, location The COMAND operating, display and control unit (A40/3n1) is in the center console.  
  Operating, display and control unit, task   GF82.85-P-3130-02PMU 
  Operating, display unit with control unit, design   GF82.85-P-3114-07PMU 
  Operating, display unit with control unit, function   GF82.85-P-3114-08PMU 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.