Survey, system components, heated rear window, location/task/design/function - GF67.29-P-9998PP

2006 Mercedes Benz C350 4MaticSECTION Survey, system components, heated rear window, location/task/design/function - GF67.29-P-9998PP

MODEL 203.0/ 2/ 7 

  Rear SAM control unit with fuse and relay module, location/task/design/function   GF54.21-P-4115PP
  Heating push-button control unit, location/task On vehicles up to 23.4.04
except code (580) Air conditioning system or,
with USA, Tempmatic
except code (581a) Automatic air conditioning
except code (581b) Comfort automatic air conditioning
GF83.20-P-2120PP
  Automatic air conditioning control and operating module, location/task On vehicles up to 31.5.01 with code (580) Air conditioning system or, with USA, Tempmatic and as of 1.6.01 up to 23.4.04 with code (581a)
Automatic air conditioning
GF83.40-P-2180PP
    On vehicles as of 24.4.04 without code (581b)
Comfort automatic air conditioning
GF83.40-P-2180PQ
  Comfort automatic air conditioning control and operating module, location/task On vehicles up to 31.5.01 with code (581a) Automatic air conditioning and as of 1.6.01 up to 23.4.04 with code (581b) Comfort automatic air conditioning GF83.40-P-2181PP
    On vehicles as of 24.4.04 with code (581b)
Comfort automatic air conditioning
GF83.40-P-2181PQ
  Electronic ignition switch control unit, location/task/design/function   GF80.57-P-4102PP
  Contents, function description of heated rear window   GF67.29-P-0998PZ 
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.