Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Activating/accepting call, function - GF82.70-P-2000B
MODELS 140, 202, 203 up to 23.4.04, 208.3, 210,215, 220 up to 31.8.03 with CODE (813) Voice control system (VCS)
Shown on models 202, 203, 208.3, 210, 215, 220 as of 6/1/00
Illustrated on model 220 up to 31.5.00
Function
By operating the VCS switch (S93/2) the voice recognition of the voice control system (VCS) is activated. The following model series dependent control units are used for this purpose:
- In the voice control module (A35/10a1) of the telephone transmitter/receiver/voice control system (A35/10) (models 140, 210 up to 5/31/98).
- in the voice control system control unit (A35/11) (models 202, 203, 208, 210 as of 1.6.98, 215, 220).
Simultaneously the VCS is actuated, which is signaled to the user by an acoustic signal (beep). Furthermore, the hands-free system and thus muting of the particular vehicle-specific component of the audio system becomes active to ensure the greatest possible stability of the user voice input.
The system is then in the Input mode. From this time on, input commands are available to the user, which permit him/her, via the hands-free system microphone (B25), to connect to the system and control it via the input commands (spoken input).
If the system does not immediately detect an entry, the sensitivity of the system is increased in step 1. If there still is no entry, the VCS is deactivated after approx. 15 s.
Accepting call
On models 140, 202, 203, 208.3, 210, 215 and 220 without multifunction steering wheel (MFL) the VCS switch (S93/2) has to be actuated in order to accept an incoming call, which corresponds to taking the telephone receiver off the hook when leading a conventional telephone call.
On models 203, 208.3, 210, 215 and 220 with multifunction steering wheel (MFL) an incoming phone call is accepted via the accept/ terminate phone call button (S111s3).
After activation, the particular vehicle-specific component of the audio system is also muted here to ensure the greatest possible stability of the user voice input. It is also possible for the user to use the hands-free system microphone (B25) for the call.
The voice output of the system is accomplished dependent on the model series via one or several hands-free system speakers.
| Dialing, function | Selection and dialog with telephone system | GF82.70-P-3000B | |
| Models 202.08/09/18 as of 1.6.00 Model 203 Models 208.3, 210 as of 1.6.00 Models 215, 220 as of 1.6.00 up to 31.8.03 Selection and dialog with audio components (radio, CD, cassette) |
GF82.70-P-3000C | ||
| Voice control system switch, location/task | GF82.70-P-4100B | ||
| Location / purpose of voice control unit | Model 140 Model 210 up to 31.5.98 |
GF82.70-P-4101B | |
| Hands-free microphone, location/task | Models 140, 202, 208, 210 with code (274) MB D-net telephone Models 140, 202, 210 with code (312) D-network portable CTEL telephone with CODE (313) D-network portable CTEL with code (314a) "Standard" D-network telephone Models 202, 208, 210, 215, 220 with code (316) MB D-network telephone (D2B) with code (317) D-network portable CTEL telephone (D2B) Model 203 with CODE (450) taxi version Models 203, 208, 210, 215, 220 with code (853) MB standard telephone Models 202, 203, 208, 210, 215, 220 with code (854) MB portable CTEL telephone |
GF82.70-P-4102B | |
| Hands-free system loudspeaker, location/task | Models 140, 202, 208, 210 with code (274) MB D-net telephone Models 140, 202, 210 with code (312) D-network portable "CTEL telephone" with code (313) D-network portable "CTEL telephone" with code (314a) "Standard" D-network telephone Models 202, 208, 210, 215, 220 with code (316) MB D-network telephone (D2B) with code (317) D-network portable CTEL telephone (D2B) Models 203, 208, 210, 215, 220 with code (853) MB standard telephone Models 202, 203, 208, 210, 215, 220 with code (854) MB portable CTEL telephone |
GF82.70-P-4103B | |
| CTEL transmitter/receiver, location / task | Model 140 Model 210 up to 31.5.98 |
GF82.70-P-4104B | |
| Voice control system control unit, location/task | Models 202, 203, 208.3 Model 210 as of 1.6.98 Models 215, 220 up to 31.8.03 |
GF82.70-P-4113A |
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.