Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Reading lamp actuation, function - GF82.20-P-2028A
2006 Mercedes Benz C350 4MaticSECTION Reading lamp actuation, function - GF82.20-P-2028A
MODEL 203
- Basic prerequisite:
- Reading lamp switch is in position "Reading lamp OFF".
- The overhead control panel control module (N70) and the rear interior lamp (E15/3) monitor the position of the reading lamp switches.
- The overhead control panel control module or the rear interior lamp recognizes that the reading lamp switch is switched to position "Reading lamp ON" and immediately actuates the reading lamp associated to the switch.
Function sequence when actuating front or rear reading lamps
| Overhead control panel control module, location/purpose/design | GF82.20-P-4110A | ||
| Rear interior lamp, location/design | GF82.20-P-4111A |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.