2003 Mercedes Benz CLK430FACTORY OEM SERVICE PROCEDURE

Splash bowl position/task/function - GF47.10-P-3101E: Notes

MODEL 202.0, 208 

Fig 1: Identifying Fuel Tank And Splash Bowl
G04728722REFER TO BASIC KNOWLEDGE
  Position  The splash bowl (80/5) is welded into the right chamber of the fuel tank (80)  
  Task  It acts as a reserve tank when cornering with a low level of fuel in the fuel tank and prevents the fuel pump drawing in air  
REFER TO BASIC KNOWLEDGE Function  Splash bowl GF47.10-P-3101-01H 
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.