Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Using M-MDS
2023 Mazda CX-5 SSECTION Using M-MDS
WARNING: This page is about a different car, the 2017 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the M-MDS to DLC-2.
- After the vehicle is identified, select the following items from the initial screen of the M-MDS.
- Select the "Module Programming".
- Select "Programmable Parameters".
- Select menu in the SSU.
- Select an item name, and then select option.
| M-MDS display | Function | Initial setting | Setting contents | Control unit | ||
|---|---|---|---|---|---|---|
| Advanced keyless function. (1) | The advanced keyless entry system and push button start system functions can be disabled. | Enabled. | Enabled./Disabled. | Start stop unit | ||
| Auto Re-lock Time. | The operation start time of the auto re-lock function can be changed. | 60 seconds | 30 seconds/60 seconds/90 seconds | Start stop unit | ||
| Lock Beep Volume. | The keyless beeper volume can be adjusted. | Medium | Off/Low/Medium/High | Start stop unit | ||
|
||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.