SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2023CX-5 SREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSON-BOARD DIAGNOSTIC - POWER LIFTGATE (PLG) CONTROL MODULEDTC U2300-54: CONFIGURATION DATA NOT RECEIVED FROM INSTRUMENT CLUSTER [POWER LIFTGATE (PLG) CONTROL MODULE]NOTES
2023 Mazda CX-5 S

DTC U2300-54: Configuration Data Not Received From Instrument Cluster [Power Liftgate (PLG) Control Module]: Notes

2023 Mazda CX-5 SSECTION Notes
DTC U2300:54 (POWER LIFTGATE CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE

Description Configuration data not received from instrument cluster
Detection condition
  • The power liftgate (PLG) control module cannot receive configuration data from the instrument cluster with the ignition switched ON (engine off or on).
Fail-safe
  • Stops the power liftgate (PLG) system operation.
Possible cause
NOTE:
  • To correctly write the configuration data sent from the instrument cluster to the power liftgate (PLG) control module to the power liftgate (PLG) control module, 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
  • DTCs are stored in the instrument cluster.
    • Instrument cluster configuration not implemented
    • Instrument cluster internal memory malfunction
  • Instrument cluster configuration data error
  • Power liftgate (PLG) control module malfunction
System wiring diagram Not applicable
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.