Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Maintenance Monitor Operation Procedure: Notes
2023 Mazda CX-5 SSECTION Notes
NOTE:
Display condition
- The maintenance monitor displays a message when any of the following display conditions are met based on the preset maintenance period.
Display condition
- Day setting: Remaining days are 15 days, 3 days, 0 days
- Distance setting: Remaining distance is 1000 km {500 mile}
- The instrument cluster displays a message at approx. 5 s intervals according to the following priority order when multiple display conditions are met.
- Scheduled maintenance
- Tire rotation
- Oil inspection/replacement
- The maintenance monitor setting information recorded in the Connectivity master unit (CMU) cannot be written to a new CMU, therefore, the maintenance monitor is set to the initial setting value if the CMU is replaced. Before replacing the CMU, explain to the customer that the maintenance monitor is reset to the initial setting value.
- After implementing the maintenance, reset the maintenance monitor items that were implemented.
- The instrument cluster displays a message at approx. 5 s intervals according to the following priority order when multiple display conditions are met.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.