2019 Mazda 6 Grand TouringFACTORY OEM SERVICE PROCEDURE

Boost Pressure Sensor/Boost Air Temperature Sensor Removal/Installation

NOTE:
  • The boost pressure sensor and boost air temperature sensor cannot be removed as a single unit. When replacing the boost pressure sensor or boost air temperature sensor, replace the boost pressure sensor/boost air temperature sensor.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION .)
  3. Remove the fastener.
    Fig 1: Boost Pressure Sensor/Boost Air Temperature Sensor, Fastener And Charge Air Cooler Duct (RH)
    G11436059Courtesy of MAZDA MOTORS CORP.
  4. Remove the charge air cooler duct (RH).
  5. Disconnect the boost pressure sensor/boost air temperature sensor connector.
    Fig 2: Boost Pressure Sensor/Boost Air Temperature Sensor Connector, Short Cord Connector And Clips
    G11436060Courtesy of MAZDA MOTORS CORP.
  6. Remove the charge air cooler. (See CHARGE AIR COOLER REMOVAL/INSTALLATION (VIN Y) .)
  7. Remove the screw.
    Fig 3: Boost Pressure Sensor/Boost Air Temperature Sensor And Screw With Torque Specification
    G11436061Courtesy of MAZDA MOTORS CORP.
  8. Remove the boost pressure sensor/boost air temperature sensor.
  9. Install in the reverse order of removal.
Factory Service Tools

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Disclosure: Verified tool recommendations may earn an affiliate commission at no cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.