Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA2013MX-5 MIATA GRAND TOURING, AUTOMATIC TRANSREPAIR AND DIAGNOSISELECTRICALHORNSINSTRUMENTATION/DRIVER INFOOIL PRESSURE SWITCH INSPECTION
2013 Mazda MX-5 Miata Grand Touring, Automatic Trans
Oil Pressure Switch Inspection
2013 Mazda MX-5 Miata Grand Touring, Automatic TransSECTION Oil Pressure Switch Inspection
- Turn the ignition switch to the ON position and verify that the oil pressure gauge reading indicates L or below.
- Start the engine and verify that the oil pressure gauge operates.
- If the oil pressure gauge does not operate, inspect the related wiring harness.
- If the related wiring harness is normal, inspect the oil pressure. See OIL PRESSURE INSPECTION [LF]
- If the oil pressure is normal, replace the oil pressure switch.
- If the related wiring harness is normal, inspect the oil pressure. See OIL PRESSURE INSPECTION [LF]
- If the oil pressure gauge does not operate, inspect the related wiring harness.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.