Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20133 I SV, 2.0L ENG VIN G, AUTOMATIC TRANSREPAIR AND DIAGNOSISQUICK LOOKUPSFLUIDS
2013 Mazda 3 i SV, 2.0L Eng VIN G, Automatic Trans
Quick Lookups: Fluids
2013 Mazda 3 i SV, 2.0L Eng VIN G, Automatic TransSECTION Fluids
| FLUID CAPACITIES | |||||||
|---|---|---|---|---|---|---|---|
| Fluid Type | Application | Standard | Metric | Fluid Spec | Note | S/H | |
| Air Cond Compressor Oil | 4.00 OZS. | 0.11 L | PAG 46 | S | |||
| Air Cond Refrigerant | 1.06 LBS. | 0.48 KG | HFC-134a (R-134a) | S | |||
| Automatic Transmission Fluid | 5 Spd Trans | 8.60 QTS. | 8.13 L | Mazda Genuine ATF M-V | S | ||
| Brake Fluid | N/A | N/A | SAE J1703 FMVSS116 DOT 3 | Fill to line on reservoir. | S | ||
| Clutch Fluid | N/A | N/A | SAE J1703 FMVSS116 DOT 3 | Fill to line on reservoir. | S | ||
| Engine Coolant | i SV,2.0L Eng | 7.90 QTS. | 7.47 L | Use FL22 type coolant in vehicles with the inscription "FL22" on the radiator cap itself or the surrounding area. For vehicles without "FL22" inscription use a mixture of demineralized water and ethylene-glycol-based coolant. Do not use solution that contains more than 60% antifreeze. Above -16Deg. C {3.2Deg. F} 65% water/35% coolant. Above -26Deg.C {-15Deg.F} 55% water/45% coolant. Above -40 Deg. C {-40Deg.F} 45% water/55% coolant. | S | ||
| Engine Oil | i SV,2.0L Eng | w/Filter | 4.50 QTS. | 4.25 L | API - ILSAC, SAE 0W-20 Full Synthetic Engine Oil | S | |
| Engine Oil | i SV,2.0L Eng | w/o Filter | 4.10 QTS. | 3.88 L | API - ILSAC, SAE 0W-20 Full Synthetic Engine Oil | S | |
| Fuel Tank | 2.0L Eng | 14.50 GALS. | 54.88 L | S | |||
| Manual Transmission Fluid | i SV,2.0L Eng | 2.93 QTS. | 2.77 L | API - GL-4, SAE 75W-80 | S | ||
| Power Steering Fluid | N/A | N/A | MAZDA Genuine ATF M-III, M-V, or equivalent (e.g. DEXRON II) | S | |||
| Windshield Washer Fluid | N/A | N/A | Ultra-Clear Windshield Washer Fluid | S | |||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.