SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSMAZDA20132 TOURING, 1.5L ENG VIN Z, AUTOMATIC TRANSREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTCOMMUNICATION DEVICESON-BOARD DIAGNOSTIC [BODY CONTROL SYSTEM)DTC TABLE [BCM]
2013 Mazda 2 Touring, 1.5L Eng VIN Z, Automatic Trans

DTC Table [BCM]

2013 Mazda 2 Touring, 1.5L Eng VIN Z, Automatic TransSECTION DTC Table [BCM]
DTC No. Description Detection condition Reference
B1B55:96 Rain sensor internal malfunction
  • Rain sensor internal malfunction.
 (See DTC B1B55:96 [BCM] ).
B1C53:13 Windshield wiper switch circuit malfunction
  • Open circuit in wiring harness between windshield wiper switch and BCM.
 (See DTC B1C53:13 [BCM] ).
B1D06:11 Turn light (LH) circuit malfunction
  • Short to ground in wiring harness between turn light (LH) and BCM.
 (See DTC B1D06:11 [BCM] ).
B1D06:15 Turn light (LH) circuit malfunction
  • Open circuit or short to power supply in wiring harness between turn light (LH) and BCM.
 (See DTC B1D06:15 [BCM] ).
B1D07:11 Turn light (RH) circuit malfunction
  • Short to ground in wiring harness between turn light (RH) and BCM.
 (See DTC B1D07:11 [BCM] ).
B1D07:15 Turn light (RH) circuit malfunction
  • Open circuit or short to power supply in wiring harness between turn light (RH) and BCM.
 (See DTC B1D07:15 [BCM] ).
B1D13:12 Interior light circuit malfunction
  • Short to power supply in wiring harness between interior light and BCM.
 (See DTC B1D13:12 [BCM] ).
B1D35:11 Hazard warning switch circuit malfunction
  • Short to ground in wiring harness between hazard warning switch and BCM.
 (See DTC B1D35:11 [BCM] ).
B1D36:92 Turn switch circuit malfunction
  • Left turn and right turn signals are input simultaneously for 2 s or more. 
 (See DTC B1D36:92 [BCM] ).
B10A6:92 Light switch circuit malfunction
  • Short to ground in wiring harness between light switch and BCM.
 (See DTC B10A6:92 [BCM] ).
B1008:11 Windshield wiper switch (INT/AUTO) circuit malfunction
  • Short to ground in wiring harness between windshield wiper switch and BCM.
 (See DTC B1008:11 [BCM] ).
B1013:23 Rear window defroster switch circuit malfunction
  • Rear window defroster switch is in a pressed condition for 2 min or more.  (Rear window defroster switch stuck).
 (See DTC B1013:23 [BCM] ).
B1087:83 Error signal from rain sensor
  • Error signal received from rain sensor.
 (See DTC B1087:83/B1087:86/B1087:87/B1087:88 [BCM] ).
B1087:86 Communication error with rain sensor
  • Communication error between rain sensor and BCM.
B1087:87 No response from rain sensor
  • No response from rain sensor.
B1087:88 Rain sensor BUS off
  • Open or short circuit in rain sensor circuit.
B1172:92 Door lock-link switch (LF) circuit malfunction
  • Lock and unlock signals are input simultaneously for 6 s or more. 
 (See DTC B1172:92 [BCM] ).
B1175:13 Front door latch switch (LH) circuit malfunction
  • Open circuit in wiring harness between front door latch switch (LH) and BCM.
 (See DTC B1175:13 [BCM] ).
B1176:13 Front door latch switch (RH) circuit malfunction
  • Open circuit in wiring harness between front door latch switch (RH) and BCM.
 (See DTC B1176:13 [BCM] ).
B1178:11 Liftgate latch switch circuit malfunction
  • Short to ground in wiring harness between liftgate latch switch and BCM.
 (See DTC B1178:11 [BCM] ).
U0001:88 CAN system communication error (HS-CAN) (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] ).
U0028:81 Keyless receiver malfunction
  • Invalid serial data received from keyless receiver.
 (See DTC U0028:81/U0028:83/U0028:87 [BCM] ).
U0028:83
  • Error signal received from keyless receiver.
U0028:87
  • No response from keyless receiver.
U0100:00 Communication error to PCM (See FOREWORD [MULTIPLEX COMMUNICATION SYSTEM] ).
U0101:00(1) Communication error to TCM
U0121:00 Communication error to DSC HU/CM
U0415:68 Signal error from DSC HU/CM
  • Correct data cannot be received from DSC HU/CM.
 (See DTC U0415:68 [BCM] ).
U2100:00 BCM configuration error
  • BCM configuration setting has not been performed.
 (See DTC U2100:00/U3000:44 [BCM] ).
U3000:44
  • BCM configuration was not done correctly.
U3003:16 BCM power supply circuit malfunction
  • BCM power supply voltage less than 10 V  for 20 s or more. 
 (See DTC U3003:16/U3003:17 [BCM] ).
U3003:17
  • BCM power supply voltage more than 16 V  for 10 s or more. 
(1) ATX
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.